A VERY LIGHT WEIGHT X-BANNER FOR SHORT TERM EVENT USE. THESE UNITS USE A FRAME IN THE SHAPE OF AN "X", HELD TOGETHER AT A HUB IN THE MIDDLE (BACK) OF THE DISPLAY. THE "X' DESIGN GIVES YOU A TENSION ROD AT EACH CORNER OF THE DISPLAY. THE GRAPHIC HAS A GROMMET (REINFORCED HOLE) IN EACH CORNER WHICH FITS OVER THE TENSION ROD. COMES IN A FABRIC CARRY BACK.

600MM WIDE X 1600MM HIGH

AT JUST $34.95 FOR THE FRAME, THE X-BANNER LIGHT IS VERY AFFORDABLE. WE CAN SUPPLY A PRINTED BANNER FOR AN ADDITIONAL $70. WE CAN ALSO USE YOUR DESIGN, IF YOU HAVE ONE, OR DESIGN ONE TO YOUR REQUIREMENTS.

CONTACT US FOR SPECIAL RATES ON LARGE ORDERS.

BANNERS ARE CHANGEABLE

AVAILABLE FOR

FRAME ONLY $35

FRAME + PRINTED BANNER $105

FRAME + PRINTED BANNER + DESIGN $150

DELIVERY $10 NATIONWIDE

PRICES EXCLUDE GST

Click here to buy via paypal or contact us for direct deposit

These units uses a frame in the shape of an "X", held together at a hub in the middle (back) of the display. The "X" design gives you a tension rod at each corner of the display. The graphic has a grommet (reinforced hole) in each corner which fits over the tension rod. This type of display has several advantages. Firstly, the graphic itself is completely separate from the display hardware, so you can more easily change graphics. Secondly, you can use a wide variety of medias for your graphic because it will be stretched taut from the corners by the tension bars. Media must be compatible with grommets. Finally, you can vary the size of your display by simply changing the shape of the "X".

The Outdoor X-Banner comes with a water tank to provide stability in outdoor conditions. Graphic can be attached with either grommeted holes or a supplied top and bottom bars (pictured). Comes in a sturdy fabric carry case.

Desk top version of a RollUp display available in A4 and A3 graphic sizes. This table top mini display system is great for highlighting products, special offers and great as a promotional giveaway.

A lightweight and economical free standing retractable display suitable for light infrequent use as a permanent display or one off event (for regular use our RollUp Regular is recommended).
Easy to assemble, an instant display stand can be created in seconds. The unit comes in an attractive metal finish. Suitable for all forms of substrate including laminated graphics, textiles and banner media. Easily transportable, the Roll-Up Lite comes in a fabric carry bag and only weighs from 2Kg for 600mm to 3.7Kg for the 1200mm.

A Rigid brochure holder that folds down to a compact size for transportation.
single width A4 x 4 holder.

A Rigid brochure holder that folds down to a compact size for transportation.

Holds A4 flyers, perfect for road shows or exhibitions.